Graybyt3 Was Here

Linux business121.web-hosting.com 4.18.0-513.11.1.lve.el8.x86_64 #1 SMP Thu Jan 18 16:21:02 UTC 2024 x86_64
LiteSpeed
192.64.117.91

File Name : php-fpm.conf.plesk

;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;

; All relative paths in this configuration file are relative to PHP's install
; prefix.

; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.

;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;

[global]
; Pid file
; Default Value: none
pid = /run/alt-php82-fpm.pid

; Error log file
; If it's set to "syslog", log is sent to syslogd instead of being written
; in a local file.
; Default Value: /var/log/php-fpm.log
error_log = /var/log/alt-php82-error.log

; syslog_facility is used to specify what type of program is logging the
; message. This lets syslogd specify that messages from different facilities
; will be handled differently.
; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
; Default Value: daemon
;syslog.facility = daemon

; syslog_ident is prepended to every message. If you have multiple FPM
; instances running on the same server, you can change the default value
; which must suit common needs.
; Default Value: php-fpm
;syslog.ident = php-fpm

; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
;log_level = notice

; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0

; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated.  This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;emergency_restart_interval = 0

; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0

; The maximum number of processes FPM will fork. This has been design to control
; the global number of processes when using dynamic PM within a lot of pools.
; Use it with caution.
; Note: A value of 0 indicates no limit
; Default Value: 0
;process.max = 128

; Specify the nice(2) priority to apply to the master process (only if set)
; The value can vary from -19 (highest priority) to 20 (lower priority)
; Note: - It will only work if the FPM master process is launched as root
;       - The pool process will inherit the master process priority
;         unless it specified otherwise
; Default Value: no set
;process.priority = -19

; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
;daemonize = yes

; Set open file descriptor rlimit for the master process.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit for the master process.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Specify the event mechanism FPM will use. The following is available:
; - select     (any POSIX os)
; - poll       (any POSIX os)
; - epoll      (linux >= 2.5.44)
; Default Value: not set (auto detection)
;events.mechanism = epoll

; When FPM is build with systemd integration, specify the interval,
; in second, between health report notification to systemd.
; Set to 0 to disable.
; Available Units: s(econds), m(inutes), h(ours)
; Default Unit: seconds
; Default value: 10
;systemd_interval = 10

;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;

; Multiple pools of child processes may be started with different listening
; ports and different management options.  The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)

; See /opt/plesk/php/82/etc/php-fpm.d/*.conf
include=/opt/alt/php82/etc/php-fpm.d/*.conf

System Information
*ReClick For Close
File : BlackDragon /simple/function.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2024-11-20 07:36:25
..	dir	-	root/root	0755	2024-03-03 10:36:18
mariadb10	dir	-	root/root	0755	2024-07-20 06:34:25
mariadb101	dir	-	root/root	0755	2024-07-20 06:34:25
mariadb1011	dir	-	root/root	0755	2024-11-20 07:39:46
mariadb102	dir	-	root/root	0755	2024-11-20 07:39:46
mariadb103	dir	-	root/root	0755	2024-11-20 07:39:46
mariadb104	dir	-	root/root	0755	2024-11-20 07:39:46
mariadb105	dir	-	root/root	0755	2024-11-20 07:39:47
mariadb106	dir	-	root/root	0755	2024-11-20 07:39:47
mysql5.5	dir	-	root/root	0755	2024-07-20 06:34:25
mysql5.6	dir	-	root/root	0755	2024-11-20 07:39:47
mysql5.7	dir	-	root/root	0755	2024-11-20 07:39:47
mysql8.0	dir	-	root/root	0755	2024-11-20 07:39:47
newrelic	dir	-	root/root	0755	2024-03-03 10:42:33
pear	dir	-	root/root	0755	2023-02-27 10:34:29
percona5.6	dir	-	root/root	0755	2024-07-20 06:34:25
php-fpm.d	dir	-	root/linksafe	0755	2024-11-20 07:36:25
php.d	dir	-	root/linksafe	0755	2024-10-23 02:41:05
php.d.all	dir	-	root/linksafe	0755	2024-11-20 07:40:03
rpm	dir	-	root/root	0755	2024-03-03 10:56:39
sysconfig	dir	-	root/root	0755	2024-04-01 06:46:49
newrelic.xml	text/xml	1.23 KB	root/linksafe	0644	2024-02-22 11:31:53
pear.conf	text/plain	1.15 KB	root/root	0644	2023-02-27 10:34:30
php-fpm.conf.default	text/plain	5.22 KB	root/linksafe	0644	2024-10-23 02:39:19
php-fpm.conf.plesk	text/plain	3.96 KB	root/linksafe	0644	2024-10-23 02:41:04
php.ini	text/plain	60.75 KB	root/linksafe	0644	2024-11-25 08:37:03